Send E-mail
Send SMS
Home  » Our Products  » 

Machine Tool Coolers


Frigid-X™ Tool Coolers, Tool Cooling System are used for dry machining applications. Tool Coolers replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost. It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matching rates and extending tool life. Produces cold air at approximately 50°F (28° C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.  We Now Have Two Systems For Your Tool Cooling Needs! "Reduce Cost Of Mist Coolant Systems With The Nex Flow™ Tool Cooling Mist System Or Replace Mist Entirely With Dry Cooling To Improve Your Factory Productivity And Environment In Machining."

REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
UsageIndustrial Use
BrandNexflow
Operating MediumCompressed Air
Operating Pressure6 Bar
MaterialSS-304

All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Frigid-XT Constantly Quieter Than Competition!

Frigid-X™ Tool Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.

It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending tool life.

Produces cold air at approximately 50º F (28º C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.

Can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations from metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free.

Tool Cooling System - Frigid-X™ - Advantages:

  • No Moving Parts
  • Quiet
  • Driven By Air, NOT Electricity
  • Small And Lightweight, Portable
  • Milling, Drilling, Routing And Surface Grinding
  • Low In Cost
  • Superior Design And Performance
  • Maintenance Free Operation
  • Made Of Durable Stainless Steel And Metal Arts - NO Cheap Plastic Parts
  • improves Production Rates And Finished Part Remains Dry
  • Prevents Burning
  • Improves Tolerance Control
  • Eliminates Coolant Costs
  • System Uses Strong Magnetic Base

Tool Cooling System - Frigid-X™ - Use and Selection:
Always use clean, dry compressed air. A manual filter is supplied with every system to insure dry air. If oil is a major problem in the compressed air line, an oil removal filter is also recommended. The temperature of the air can be controlled by reducing the pressure using either a regulator or manual shut-off valve. A solenoid valve may also be connected into the machine operation to turn the air supply to the cooling unit on-off as it is needed, thereby conserving compressed air usage.

Dry Compressed Air and Dry Air Filters:
Dry compressed air is easy to achieve utilizing a water removal filter with automatic drain and in the case of oil in the air lines, an oil removal filter with automatic drain. We recommend a 5 micron filter for water removal and a 0.03 micron filter for oil removal. These dry air filters will achieve the air quality required for any Nex Flow blowoff and cooling products.

Applications

Replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.

  • Sharpening Tools
  • Routing
  • Machining Plastics
  • Drill And Cutter Grinding
  • Milling, Drilling, Routing And Surface Grinding
  • Plunge And Form Grinding
  • Setting Hot Melt Adhesives
  • Laser Cutting
  • Tire And Rubber Grinding
  • Band Saw Blade Cooling
  • Chill Roll Nip Cooling

Yes! I am Interested
View PDF


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
BrandNexflow

When lubrication is required as well as cooling, lubricating mist can be reduced and cooling enhanced.

Heavy coolant can be messy, costly and must be carefully maintained. Dry machining is not always possible due to the need for lubrication or additional cooling that cold air alone cannot provide.

The unique patent pending low cost Frigid-X™ Sub-Zero Vortex™ Tool Cooling Mist System is ideal for these applications. The unit is comprised of a coolant/lubrication suction system which draws any water based liquid into a specially designed delivery system. This cools the liquid to deliver a very cold fluid “mist” at around 40°F (5°C). This cooling allows for as much as 20% less coolant needed, faster production rates and improved quality. An Adjusting screw controls the amount of mist required. Simple operation, no moving parts except for the adjusting screw means long life, low cost operation and zero maintenance.

Frigid-X™ Sub-Zero Vortex™ - Advantages:

  • No electricity required - simplicity in design
  • Low Cost
  • Reduces coolant / lubricant cost by using less fluid
  • Improves safety with less mist
  • No moving parts except for an adjusting screw for the fluid
  • Small and lightweight - portable
  • Maintenance free operation
Operation

The liquid is cooled by means of a small vortex tube that uses around 5 SCFM (142 SLPM) at a maximum of 50 psig (3.5 bar). Pressure can be adjusted up or down slightly to avoid freezing of the liquid or to get a colder temperature.

An adjusting screw controls the level of mist required. Liquid is siphoned into the unit using a long plastic tube connected to the main unit. A heavy duty removable magnet secures the Sub-Zero Tool Cooling Mist System onto a machine. The magnet can also be removed and mounting holes may be used to secure the mist system.

All you need is the liquid to cool and/or lubricate and a small amount of filtered (clean) compressed air at 50 psig (3.5 bar). No electrical components, no expensive pumps or moving parts except for the adjusting screw assures long life and maintenance free operation.

Applications
  • Solid Carbide End Mills
  • Wherever lubrication is required in machining
  • When cooling is required beyond the capability of cold air alone

Yes! I am Interested
View PDF


Ask for Price

Price on Request: Get Latest Price

Product Details:
BrandNexflow

Adjustable Spot Cooler - Frigid-X™ is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end.

Adjustable Spot Cooler - Frigid-X™ temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30ºF to room temperature and can be easily set with a thermometer.

Adjustable Spot Cooler - Frigid-X™ comes with three brass generators for flow rate adjustment - 15 SCFM (425 SLPM), 25 SCFM (708 SLPM) and 30 SCFM ( 850 SLPM) providing refrigeration up to 2100 BTU/hr (615 Watts).

All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Frigid-X™ is Constantly Quieter Than Competition!
Sub-zero cold air temperatures from an ordinary compressed air supply for spot air cooler applications where adjustability is important!

Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the adjustable spot cooler.

Units are available with either a single point hose kit for small surface areas, Adjustable Spot Cooler or a dual point hose kit when heat is generated over a larger surface area.

Adjustable spot cooler can produce a wide range of airflow and temperature by adjusting the knob at the hot end and changing the various generators supplied.

The generators control the air consumption and are easily interchangeable.

Adjustable spot cooler has a 25 SCFM (708 SLPM) generator installed that will produce up to 1,800 Btu/hr. of cooling. If less is required, the 15 SCFM (425 SLPM) generator can deliver 1,100 Btu/hr.

If more cooling is needed Nex Flow™ can supply you with the 30 SCFM ( 850 SLPM) generator for up to 2,100 Btu/hr. of cooling.

Adjustable Spot Cooler - Frigid-X™ Features:

  • No moving parts or electricity
  • Compact and lightweight
  • Low cost
  • Maintenance free
  • Instant cold air
  • Quiet
  • Magnetic base
  • Interchangeable generators

Yes! I am Interested
View PDF


 

Explore More Products
 

 

Send SMS
KJN Enterprises (A Distributor Of Nex Flow Air Products Corp)
Ashish Shah  (Partner)
No. 68- A, New Empire Industrial Estate, Kondivita Road Andheri East
Mumbai - 400059 , Maharashtra , India
Send E-mail
Share Us:
X