Send E-mail
Send SMS
Home  » Our Products  » 

Air Optimization Products


Nex FlowTM Efficient use of Compressed Air - It has to be understood that compressed air is a high cost energy source. So there has to be a reason to use compressed air alternative products. ANY amplification technology, when used properly can get you excellent efficiencies. Because our compressed air products are generally light weight, can be turned on and off rapidly (so only used when necessary), and are low or no maintenance, their efficient use overall contributes well to the overall productivity of a production facility.

REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
BrandNexflow

Product Overview
    • The X-Stream™ Air Flow Meter represents a radical departure from conventional air flow meter designs, providing easy installation, low cost and accurate of the probes in the air stream.

      The X-Stream™ Air Flow Meter clamps around a pipe with its probes projecting into the pipe through drilled holes. The low cost of the air flow meter makes it ideal for installation at points throughout the air distribution system to track valuable compressed air and assess system operation.

      The X-Stream™ Air Flow Meter clamps onto a pipe, with two sensing probes projecting into the pipe through 3/16" drilled holes. It seals directly into the pipe; no cutting or welding is required for installation. Because each air flow meter is made and calibrated for a specific size of pipe, the digital display indicates the air flow directly, with no setup or adjustment.

      The X-Stream™ Air Flow Meter measures airflow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required and then calculates airflow on basis of pipe area. The flow rate, in SCFM, is shown on a large 4 digit display; a 4-20 mA output and pulse output permit remote display, totalizing and data collection. Metric display is optional.


Yes! I am Interested
View PDF


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
BrandExtech, Nexflow

X-Stream™ Sound Level Meter is used to measure and monitor the sound level in all types of industrial environments. Used for compressed air exhaust noise measurement it can identify areas where costly and inefficient blow off can be replaced by energy efficient Nex Flow™ blow off products. In many instances, noise may be reduced by amplification products as much as 10 dBA, to protect workers from excessive and damaging noise levels and reduce energy use.

Model 91004 Low/High Range Sound Level Meter

Dual range Type 2 digital sound level meter with backlit LCD display

Sound Level Meter Features:

  • High accuracy meets ANSI and IEC 651 type 2 standards
  • High and low measuring ranges
  • Data Hold and Max Hold functions
  • Backlit display toview in dimly lit areas
  • Complete with microphone wind screen and 9V battery

Sound Level Meter:
A Nex Flow™ Sound Level Meter can monitor the noise levels in a manufacturing operation. Two versions are available.

Sound Level Meter Specifications:
  • Display Counts 2000, display LCD
  • Range Low: 35 to 100 dBA
  • High Range: 65 to 135 dBA
  • Basic Accuracy: +/-1.5 dBA
  • Weighting: (A & C) yes
  • Response Time: (Fast/Slow) yes
  • Condenser Microphone: 0.5" (12.7mm)
  • Dimensions: 8.2" x 2.1" x 1.25" (210mm x 55mm x 32mm)
  • Weight: 8.1 oz (230 gms)
Model 91005 Data Logging Sound Level Meter

 

  • Stores up to 20,000 records with real date and time
  • Stamp meets ANSI and IEC61672-1 Type 2 standards

Sound Level Meter Features:
  • 30 dBA to 130 dBA range with 1.4 dBA accuracy
  • Meets ANSI and IEC61672-1 Type 2 standards
  • Data logging capability up to 20,000 records at speed 1/sec to 1/59sec
  • Capture up to 10 reading/sec when connected to a PC
  • Min/Max, Data Hold, Auto Power Off
  • Built-in USB port, double molded housing with built-in stand
  • Complete with AC adapter, Windows compatible software, USB cable, wind cover, tripod, 9V battery and hard carrying case

Sound Level Meter Specifications:

  • Range Low: 30 to 130 dBA
  • Basic Accuracy: +/-1.4 dBA
  • Weighting: (A & C) yes
  • Response Time: (Fast/Slow) yes
  • Analog Output: AC/DC
  • Datalogging: 20,000 points
  • PC Interface: USB
  • Dimensions: 10.9" x 3" x 2" (278mm x 76mm x 50mm)
  • Weight: 12.3 oz (350 gms)

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
BrandNexflow

The Nex Flow™ user-friendly PLC flow control system (PLCFC) for compressed air is truly advanced and uses the most modern technology available today and can be used as a standalone unit or interfaced with other automated systems. The PLCFC is a PLC based system – not just a simple timer. It is not just a simple, often overpriced sensor and timer. The PLCFC combines a photo electric sensor to turn on the air when the target passes the sensor and to turn off the air when it leaves the sensor. (The unit is set to have a 2 second delay after it leaves the sensor but turns on instantaneously when it sees the target). We can supply an optional timer if the customer wants to set the unit to turn off based on time rather than using the sensor to turn it off.

Unlike many competitive units, which only offer a simple on-off with timer, it does not really optimize the air use if the timer is set wrong and leaves the system running far longer than necessary.

We can control not only solenoid valves for on-off but can control any electrical devices such as motors, fans, conveyor motors that carry the parts, etc.

Also, our systems which come complete with one sensor, can operate with up to eight sensors (not just optical, but proximity switches and other kinds of sensing devices) for a multiple of independent tasks. Each task can be programmed. Nex Flow™ can offer the service of special programming according to customer needs.

In addition, you have a choice of any one of two types of sensors –a 500 mm sensing range diffuse type (no reflector needed) or a 3000 mm sensing range reflector type – all depending on the need. Other special sensors can be supplied on request such as laser sensors.

All this comes in a simple package at almost the same cost as the competition!

The system can be programmed to suit any special application the customer may have for blow-off systems, other automation applications or it can be tied into existing automated systems.

It is easily connected for either 110V or 220V making it suitable for applications around the world. Designed for use in the industrial environments including wet ones, this rugged unit is easy to install in tight places – flexible and easy to use and adaptable.

Advantages:

  • Easy to install and hook up – 110V to 220V
  • Suitable for NEMA 4/IP56 environments
  • Compact sensor for mounting in tight spaces
  • Optional timer if desired – unit comes preset for tight on-off control for best results in saving air – a true optimizer
  • Box has four mounting lugs for easy mounting
  • Choice of sensors for use up to 3000 mm (10 feet)
  • Sensors withstand water dust, oil, and coolant.
  • Sensors have superior immunity to noise and inductive loads
THE BEST CHOICE FOR OPTIMIZING YOUR OPERATION AND SAVING COMPRESSED AIR Applications

 

  • Parts dust and debris blow-off
  • Parts Drying system
  • Cleaning of parts before packaging
  • Filing operations
  • Cooling hot parts
  • Static elimination and cleaning of plastic parts

Yes! I am Interested
View PDF


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
Display TypeDigital
BrandNexflow

Why our Ultrasonic/ Ultrasound Leak Detector Does the Job and Why Others May Not

REMEMBER: The better the system, the more leaks you find and the more money you save!

Always beware of cheap ultrasonic leak detector that just may not do the job. Ours do the job because of the following:

FIRST: Look at the headphones. If they are an open walkman style, these will be useless in a noisy plant because they offer absolutely NO protection from the ambient noise which can be at high levels! (After all, why else would you need an ultrasonic lead detector!). So how can you hear the leak in the headphone without protection from the ambient audible noise in the plant? Our headphones completely cover the ear providing 130dB hearing protection. Some competitive units would not be useable in a typical factory where hearing protection is mandatory because the inspector would have to insert ear plugs in his ears. Our headphones don't require this.

SECOND: Look at frequency range. Our frequency is centered at 38.4 kHz with an open window of +/- 2kHz. By having a bandwidth this narrow we are able to eliminate other sources of ultrasonic parasite noise. It is absolutely critical that you amplify just this narrow single harmonic band of sound. Some detectors amplify EVERY frequency from 20kHz up to 100kHz. That's because the manufacturer did not include any low pass filters. This also affects the output signal in the headphones. It also affects the directionality of the device. At low frequency it is much more difficult to know where the sound is coming from because the wavelength is larger and more reflective.

THIRD: Extension tubes. For accessing tight areas some firms suggest using a hollow tube (tubular extension) with their system. Ultrasound will not travel well into this tube so the equipment will be less sensitive in hard to reach areas. If the tube is 6" long for example, that means the sensor is always a minimum of 6" away from the source. The Nex Flow™ system sensor is at the end of the flexible extension so the sensor is "always" directly exposed to the leak making our equip

Specifications NEX FLOW™ "FLEX.US" Ultrasonic / Ultrasound Leak Detector

The FLEX.US ultrasonic leak detector kit comes with the FLEX.US unit and manual and utilizes two AA alkaline batteries (included).

The FLEX.US is a complete kit - the high quality flexible sensor is mounted on the end of a flexible steel pipe so the ultrasonic sound can access hard to reach areas. The unit converts the ultrasonic noise of a leak into a sound humans can hear (hissing sound) and not just some beeping sound or LED display that may not distinguish a leak sound from other phenomenon.

The headset has excellent noise attenuation for use in the noisiest of environments.
A rugged carrying case protects your FLEX.US when not in use.

The FLEX.US is a solid tool - built to last, it is easy to use and will provide many years of service

Yes! I am Interested
View PDF


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
BrandNexflow

The Haug Mini Spot Ionizer neutralizes electrostatic spot charges with air support and great efficiency and force over a small flat area. This unit proves its efficiency especially in mounting places where there is little room or where mounting is very complicated. Applications include injection molding for the elimination of material particles or for cleaning of pendants.

SPECIAL NOTES:
Haug static bars come with a patented connector to assure safety in operation and maintenance. Field repairable, it prevents a connection if the static bar is removed or attached while power is still on at the power supply.

Cable is FULLY SHIELDED unlike some manufacturers which claim shielding which may only be partial. This results in much longer life for Haug products.

REPAIRABLE POWER SUPPLIES - almost unheard of in the industry, Haug power supplies are repairable and come with a 2 year warranty.

Yes! I am Interested
View PDF


 

 

 

Send SMS
KJN Enterprises (A Distributor Of Nex Flow Air Products Corp)
Ashish Shah  (Partner)
No. 68- A, New Empire Industrial Estate, Kondivita Road Andheri East
Mumbai - 400059 , Maharashtra , India
Send E-mail
Share Us:
X